The Benefits Of Home Energy Savings
By. Weerad D. Arma [caption id="attachment_128231" align="alignleft" width="300" caption="Home Energy Savings "][/caption]
A typical American home would spend almost $2000 a year on electric bills alone. That would equate to more than $160 a month. But did you know that a large portion of the energy is wasted than used? And if we can only sum up all the wastes of every American household and divert this somewhere else, we can power the rest of the world living in darkness. Unfortunately, we couldn't. We cannot convert this wasted energy in more useful ways. But this does not mean that we cannot do anything about it. We can start making changes right at our very home.
Without spending too much before you can actually save, you can convert your home into an energy efficient environment. Here's how:
1. Repair and leaks and damages all over your house
During winter, your house needs to be secured and sealed. In this way, the cold air outside would not enter your home that would give your heating system a hard time warming up the house. Make sure the doorframes, windows, sills, and joints would not let the cold air enter the house. Sealants can easily do the job. For portions of the house with moving parts contacting to the non-moving parts like garage doors, exterior doors, operable windows, and door of attic, weatherstrippings act as a good sealant. Weatherstripper is a rubber material that seals the movable object from its non-moveable object. Weatherstripper can usually be seen on vehicles between the doors and the doorframes.
2. Use plastic window covers
To efficiently block the heat from going out of your house, you can use plastic window covers. This would effectively reduce the energy cost since your heating system would not be forced to replace the heat lost. This is one inexpensive and smart way to start your home energy saver.
3. Remove all the door gaps
Door gaps usually occur when the wood used for your door shrinks due to the temperature change or if the doors are not properly installed. If this happens, make sure you seal and remove these door gaps. As was mentioned above, leaks could cause additional work on your heating system that in turn, cost you a lot of money. Make sure you keep your doors sealed and tight.
4. Replace your incandescent bulbs with fluorescent lights.