Soft Reset:
System -- Reset Configuration -- Centang No Default Configuration -- Reset -- Apply -- Ok
System -- Identity -- (Isi Nama & Absen)
DHCP Client:
IP -- DHCP Client -- "+" Tambah Baru -- Interface (Ether1) -- Apply -- Ok -- Tunggu sampai status bound
Cek Koneksi Internet
Buka New Terminal - ping 8.8.8.8 - jalankan
DNS:
IP -- DNS
Server: 8.8.8.8 / 8.8.4.4
Centang Allow Remote Request -- Apply -- Ok
NAT:
IP -- Firewall -- Tab NAT -- "+" Tambah Baru
General :
Chain : Srcnat
Out Interface : Ether1
Action :
Action : Masquarede
Apply -- Ok
IP Address:
IP -- Address - + (Tambah Baru)
Ether2 : 192.168.100.1/25
Wlan1 : 192.168.200.1/24
Mengaktifkan Wlan1:
Wireless -- Interface -- Klik pada Wlan1 -- Klik ikon "" centang
Wireless -- Interface -- Double klik pada Wlan1
Mode : Ap Bridge
Band : 2 Ghz B/G/N
SSID : (Bebas)
Country : Indonesia
DHCP Server:
IP -- DHCP Server -- DHCP Setup -- "+"
Ether2 : 192.168.100.2--192.168.100.100 (Give Out)
Wlan1 : 192.168.200.2--192.168.200.100 (Give Out)
Ubah IP laptop jadi otomatis:
Contol Panel -- Network And Internet -- Network And Sharing Center
Change Adapter Setting -- Klik Kanan Local Area Connection -- Pilih Setting
Pilih IPv4 -- Pilih Properties -- Pilih Obtain An IP Address Automaticly
SNTP Client:
System -- SNTP Client
Centang Enabled
Mode : Broadcast
Primary NTP Server : 162.159.200.1
Secondary NTP Server : 129.250.35.251
Apply -- Ok
Blok Client tidak bisa ping ke router
IP -- Firewall -- New Rule
Chain : input
Src. Address : 192.168.100.2--192.168.100.50
Protocol : icmp
Action : drop